Note:
It may take one or more test prints before you achieve your desired output.
TTrroouubblleesshhoooottiinngg H
Heellpp
LLooccaattiinngg tthhee PPrreessss SSeerriiaall N
Nuum
mbbeerr
The press serial number can be accessed from the User Interface (UI) or by locating the serial number
plate on the inside frame of the first feeder tray (Tray 1).
1. Press the
Machine Status
button on the UI.
2. From the Machine Status screen, ensure that the
Machine Information
tab is displayed.
The press serial number is displayed under General Information.
3. If there is a loss of power and it is not possible to access the Machine Status screen, the press
serial number can also be found on the inside frame of the press near paper Tray 1:
a.
At the press, fully open paper Tray 1.
b.
At the left of the feeder tray, on the press frame, locate the plate with the serial number
(
SER#
).
C
Caalllliinngg ffoorr SSeerrvviiccee
1. Record any displayed fault codes.
For more information, refer to
and
.
2. Record the press serial number.
a.
Select the
Machine Status
button at the press control panel.
b.
From the Machine Status screen, select the
Machine Information
tab.
The serial number is listed with the Machine Information.
c.
If the serial number is not displayed, open Tray 1 and locate the serial number plate on the
left side of the frame (
SER #
).
For more information, refer to
Locating the Press Serial Number
.
3. If output quality is a problem, take a sample as a reference to assist you in describing the
problem over the telephone when answering the questions from the customer support operator
about the defects.
443