manualshive.com logo in svg

Xerox Versant 2100 Press, Руководство системного администратора

Поделиться
Скачать
Xerox Versant 2100 Press Скачать руководство пользователя страница 65

Audio Tones

Use the Audio Tones feature to select whether or not to sound an alarm for various
press functions; for example an alarm can be set to sound when a job ends or there is
a fault. Options include:

Control Panel Select Tone

Select the volume level that sounds when a button on the press Control Panel is correctly
selected. Select from Loud, Normal, and Soft. To disable the sound, select Off.

Control Panel Alert Tone

Select the volume level that sounds when a non-functioning (or grayed-out) button is
selected or when an error occurs. Select from Loud, Normal, and Soft. To disable the
sounds, select Off.

Base Tone

For a button that toggles (the setting changes each time it is pressed), select the volume
level that sounds when the button is in its initial (first) position. Select from Loud,
Normal, and Soft. To disable the sound, select Off.

Machine Ready Tone

Set the volume level that sounds when the press is ready to print or after the press
powers on. Select from Loud, Normal, and Soft. To disable the sound, select Off.

Job Complete Tone

Select the volume level that sounds when the press successfully completes the specific
cycle, such as a print job. Select from Loud, Normal, and Soft. To disable the sound,
select Off. The default setting is Soft.

Fault Tone

Select the volume level that sounds when there is an error termination. Select from
Loud, Normal, and Soft. To disable the sound, select Off.

Auto Clear Alert Tone

Select the volume level that sounds when the automatic clear feature is enabled. Select
from Loud, Normal, and Soft. To disable the sound, select Off.

Alert Tone

Select the volume level that sounds when a fault, such as a paper jam occurs, and the
fault is left unattended. Select from Loud, Normal, and Soft. To disable the sound,
select Off.

6-9

Xerox

®

 Versant™ 2100 Press

System Administration Guide

Common Service Settings

Содержание Versant 2100 Press









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды