Xerox Telecopier 7033, Руководство по обслуживанию

Страница: 171 / 286

6.7 Change Tag/MOD
Information
6.7.1 Tag/MOD Index
The Tag/MOD matrix is located on the cross
frame beneath the donor film carrier.
All important modifications to the terminal
that are installed in the factory or in the field,
are identified by a number marked on this
matrix. The appropriate Tag/MOD number
should be marked off or removed from the
matrix whenever a Tag/MOD is installed.
Determine the Tag/MOD level of the terminal
by the Tag/MOD matrix located inside of the
terminal.
Refer to the tag classification for information
as to when to use the tag. Read the
description to determine how the terminal will
benefit from the Tag/MOD. Refer to the kit
number to order the modification kit. Refer to
the bulletin number for additional tag
information.
Refer to the factory and field install serial
numbers to determine which Tag/MODs were
installed at the factory and which are to be
installed in the field. The manual is revised to
include the latest machine changes listed in
Table 1. Tag/MOD Index.
Tag/MOD Classification (USO):
Classification of Tag/MODs are identified
below by a letter (M, N, O, R, or S). The list
below defines the degree of importance
assigned to each letter:
M Mandatory
N Not installed in field
O Optional
R Repair
S Situational
Tag/MOD Classification (RX):
Classification of the Tag/MOD is identified
below by a Class number. The list below
defines the degree of importance assigned to
each Class number:
Class 1 Safety Tag/MOD which must be made
in the field immediately; parts are
available.
Class 2 Tag/MOD made in the field,
retroactive on all machines, on next
service call.
Class 3 Repair by replacement Tag/MOD.
Class 4 Tag/MOD incorporated at the
direction of local management or to
meet the customer’s requirements.
Class 5 Production only.
Table 1. Tag/MOD Index
Tag/MOD and
Classification
Description
Kit and
Bulletin Numbers
Cut-in Serial
Number
Part Number
1
Class 3
Video processor ASIC change on main PWB for resolution
conversion (300 to 200 SPI) improvement.
Printer control ASIC change on main PWB for print quality
improvement. ---- USO 7032:
010001
USO 7033:
010013
FC 7032:
060001
FC 7033:
0100001
LA 7032:
070001
LA 7033:
070000
RX 7033:
653835 USO: 140K79164
RX: 140K79174
6/92
6.7, 6.7.1
6-26 Telecopier 7032 / 7033 Service Manual
www.printcopy.info
www.printcopy.info