Xerox PrimeLink B9100, Руководство пользователя

Страница: 95 / 484

Scan to PC
The Scan to PC service allows you to scan documents and send the scanned data to a network server using the FTP
or SMB protocol.
S TA RT I N G A S C A N TO P C J O B
To start a Scan to PC operation:
1. Load the original document into the document feeder.
2. At the control panel, press the SSeerrvviicceess H Hoom mee button.
3. Touch SSccaann ttoo PPC C.
4. By default, the transfer protocol is set to SMB. To select a different transfer protocol, touch TTrraannssffeerr PPrroottooccooll.
Refer to
Transfer Protocol .
5. Select a destination. Refer to Specify Destination .
6. Adjust the scan settings as needed. Refer to Scan Settings .
7. Press the SSttaarrtt button.
T R A N S F E R P R O TO C O L
1. On the Scan to PC tab, touch TTrraannssffeerr PPrroottooccooll.
2. Select a forwarding protocol:
• FFTTPP: This option transfers files using the FTP protocol.
• SSM MB B: This option transfers files using the SMB protocol.
• SSM MB B ((U UN NC C FFoorrm maatt)): This option transfers files using the SMB protocol, with the Universal Naming
Convention (UNC) format. The UNC format is as follows:
\\host name\shared name\directory
name
3. Touch SSaavvee.
S P E C I F Y D E S T I N AT I O N
Use this option to specify a destination PC using the control panel keypad. To specify a forwarding destination, for
the selected protocol, enter information in the fields provided.
To populate the appropriate server information into the fields provided, on the main tab of the Scan to PC screen,
select an option:
• Using the Address Book
• Browse Network for PC
To add destination information manually, refer to Add Destination Information Manually .
Using the Address Book
You can use the address book to populate the fields.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
95
Scanning