![background image](http://html1.mh-extra.com/html/xerox/phaser-8560mfp-8860mfp/phaser-8560mfp-8860mfp_advanced-features-manual_3583595057.webp)
Printer Settings
Phaser® 8560MFP/8860MFP Multifunction Printer
4-7
Changing Intelligent Ready Mode
Intelligent Ready mode is an automated system that:
■
Monitors the printer’s usage.
■
Warms up the printer when you are most likely to need it based on past usage patterns.
■
Activates the Power Saver mode when the printer times out.
To turn on/off the Intelligent Ready mode, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To turn Intelligent Ready mode on/off on the control panel:
1.
Press the
System
button.
2.
Select
General Setup
, and then press the
OK
button.
3.
Select
System Controls
, and then press the
OK
button.
4.
Select
Intelligent Ready
, and then press the
OK
button.
5.
Select
Off
or
On,
and then press the
OK
button to change the settings.
Using CentreWare IS
To select Intelligent Ready mode or to schedule warmup/standby settings using
CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Click
Properties
.
4.
Select the
General
folder on the left navigation panel, and then select
Warmup
.
5.
Select
Intelligent Ready
,
Scheduled
, or
Job Activated
from the
Warmup Mode
drop-down list to change the setting.
6.
If you selected
Scheduled
in Step 5, make selections for each day’s warmup setting and
standby setting.
7.
Click the
Save Changes
button at the bottom of the screen.
Note:
Although the control panel selections only enable you to turn Intelligent Ready mode
on or off, CentreWare IS enables you to specify particular printer Warmup modes and settings.