Xerox PHASER 7500, Руководство по обслуживанию

Страница: 152 / 992

3-14 Phaser 7500 Printer Service Manual
Error Messages and Codes
Status Messages and Codes
Printer status codes that appear in the Service Usage Profile at line 237 and on the
printer Status page are defined in the following table. CL indicates an existing
chain-link. Refer to the
“Messages, Chain Link Codes, and Procedures” on page 3-4
for additional information.
Message Code Message Code
Front Door Open 150 Left Door A Open 151
Left Door B Open 152 Left Door C Open 153
Jam at Duplex B CL Jam at Duplex AB CL
Jam at Door A CL Jam at %s CL
Paper Size Jam at %s CL Paper Type Jam at %s CL
Misfeed at Tray 1 CL Insert Tray 2 160
Insert Tray 3 161 Insert Tray 4 162
Insert Tray 5 163 Tray 2 Missing 164
Tray 3 Missing 165 Tray 4 Missing 166
Tray 5 Missing 167 No Paper in MPT 168
No Paper in Tray 2 169 No Paper in Tray 3 170
No Paper in Tray 4 171 No Paper in Tray 5 172
Tray 2 Paper is Low 173 Tray 3 Paper is Low 174
Tray 4 Paper is Low 175 Tray 5 Paper is Low 176
Out of paper: Load %s with %s
%s 200 Manual Feed %s %s 210
Wrong paper size: Load %s with
%s %s 220 Paper not available: Load %s
with %s %s
230
Paper not available: Load %s
with %s %s 240 Output Tray Full 250
Cyan Toner Low 251 Magenta Toner Low 252
Yellow Toner Low 253 Black Toner Low 254
Fuser Near End of Life 255 Transfer Roller Near End of
Life
256
Waste Cartridge Is Almost Full 257 Imaging Unit 1 Near End of
Life
258
Imaging Unit 2 Near End of Life 259 Imaging Unit 3 Near End of
Life
260
Imaging Unit 4 Near End of Life 261 Accumulator Belt Near EOL 262
Developer 1 Near EOL 263 Developer 2 Near EOL 264
Developer 3 Near EOL 265 Developer 4 Near EOL 266
Tray 1 Feed Rollers Past EOL 267 Tray 2 Feed Rollers Past EOL 268
Tray 3 Feed Rollers Past EOL 269 Tray 4 Feed Rollers Past EOL 270