Xerox Phaser 6280, Руководство по обслуживанию

Страница: 422 / 672

5-48 Phaser 6280 Color Laser Printer Service Manual
Print-Quality Troubleshooting
Skew
The printed image is not parallel with both sides of the paper.
Initial Actions
■
Check the paper transfer path.
■
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes Example Print
■
Tray 1 Retard (Separator) Roll Assy.,
PL2.1.3
■
Tray 2 Retard Roll, PL2.2.17
■
MPT Feed Roll, PL3.1.10
■
Feeder Assembly, PL3.2.1
■
Tray 2 Feed Roll (Nudger Roll),
PL3.2.53
■
Duplex Unit, PL11.1.1
■
Tray 3 Feed Roll (Nudger Roll),
PL12.3.29
■
Tray 3 Retard Roll, PL12.5.17
Troubleshooting Procedure Table
Step Action and Questions Yes No
1
1. Check the paper condition.
2. Is the paper dry, recommended
type, and loaded in the correct
position?
Go to step 2. Replace the
paper.
2
1. Check the Front Cover Latch. Open
and close the Front Cover.
2. Does the error still occur?
Go to step 3. Complete.
3
1. Check the Transfer Unit for correct
installation. Reseat the Transfer Unit
(page 8-8).
2. Does the error still occur?
Go to step 4. Complete.
4
1. Check the Print Cartridge (C/M/Y/K)
for correct installation. Reseat the
Print Cartridge (page 8-10).
2. Does the error still occur?
Go to step 5. Complete.
Skew 2