Xerox Phaser 6200, Руководство по установке

Страница: 4 / 30

Phaser® 6200 Color Laser Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved. 1
Setting up the Printer
This section covers the basic steps to set up the printer:
■
Unpacking the printer — see page 1.
■
Removing the packing tape — see page 4.
■
Loading paper in the tray — see page 6.
■
Preparing the toner cartridges — see page 9.
■
Installing the imaging unit — see page 10.
■
Connecting the printer — see page 13.
■
Installing the printer driver — see page 14.
Unpacking the printer
1. If you plan to use a High-Capacity Feeder, set it up first. Refer to the High-Capacity Feeder
section of this Setup Guide or the instruction sheet that comes with the High-Capacity Feeder.
If you won’t be using a High-Capacity Feeder, plan to locate the printer on a sturdy table or
counter. The ideal height for the top of the printer is shown in the following illustration.
Instructional videos for setting up the printer and installing upgrades are available on the
Interactive Documentation CD-ROM or the Xerox web site at:
www.xerox.com/officeprinting/6200support/
You can also refer to the printed Setup and Quick Reference Guide that comes with the printer.
<
100 cm
(39 in.)