7.
Place the two rubber cushions, marked
L
(left) and
R
(right), onto
the metal bar on either side of the platen. Make sure that the
rubber cushions are positioned with the posts
upright
(or
leaning
slightly forward)
and
facing outward
as shown.
Caution
The rubber cushions protect the thermal head. If they are
positioned incorrectly, the thermal head will be damaged
in shipping.
8.
Replace the transfer roll tray inside the printer.
9.
Close the top cover; the thermal head must be resting on the
rubber cushions.
10.
Secure the top cover closed. Use masking tape.
L
8849-73A
L
7
