![background image](http://html.mh-extra.com/html/xerox/phaser-3400/phaser-3400_user-manual_885499012.webp)
2
Phaser 3400 Personal Laser Printer
Control Panel
1.
Error light
■
Blinking = Insufficient memory
■
Blinking alternating with the
Paper
light blinking = Output tray is full.
■
2 fast blinks, then off, then 2 fast
blinks, then off, etc. = Toner is
getting low. Replace the laser print
cartridge soon.
■
On = Cover open, cartridge not
installed or not seated properly
■
On with
Paper
light = Paper jam
2.
Manual-feed
light
■
On with
Data
light = Ready for a
manual-feed job. Load paper in the
multi-purpose tray and press the
button to start the job.
3.
Paper light
■
On = Out of paper
■
On with
Error
light = Paper jam
■
Blinking alternating with the
Error
light blinking = Output tray is full.
4.
Data light
■
On = Ready to receive data
■
On with
Manual-feed
light = Ready
for a manual-feed job
■
Slow blink = Receiving data
■
Fast blink = Printing
5.
Cancel button
■
To cancel a print job, hold down the
Cancel
button until all lights blink,
then release the button.
6.
Print button
■
When the
Manual-feed
light is on
and paper is loaded in the
multi-purpose tray, press the
button to feed the paper into the
printer.
■
To print a Configuration Sheet, hold
the
button until all lights blink,
then release the button.
If all lights are blinking, this indicates a system error. Turn the power off and
then back on to clear. If the problem persists, contact Xerox Customer Support.
1
2
3
4
5
6
Содержание Phaser 3400
Страница 1: ...P H A S E R 3 4 0 0 P E R S O N A L L A S E R P R I N T E R User Guide ...
Страница 2: ...Xerox Phaser 3400 Personal Laser Printer User Guide June 2001 ...
Страница 33: ...User Guide 23 4 Slide the tray back into the printer 5 To resume printing open and close the top cover 1710 51 ...
Страница 40: ...6 0 9 T 1 4 4 7 8 ...