Xerox Phaser 3330, Руководство системного администратора

Страница: 67 / 92

Printing
Xerox
®
Phaser
®
3330 Printer 67
System Administrator Guide
8. To install the Xerox ® Print Driver package:
a. Open the package with your OS package manager.
b. To install using a command-line utility, change to the directory where you downloaded the file.
Then for your operating system, type the appropriate command-line utility to run the installer.
For example:
• Red Hat : rpm -U <filename> .rpm
• Debian-based Linux : dpkg -i <filename> .deb
• AIX : rpm -U <filename> .rpm
• HPUX : <filename> .depot.gz
• Solaris : pkgadd -d <filename> .pkg
Note: Most installations create a Xerox directory in
/opt/Xerox/prtsys
. For additional information
about utilities included in the OS package manager, refer to the manual included with the package.
For example,
man xeroxprtmgr
.
Launching Xerox ® Printer Manager
To launch Xerox ® Printer Manager, do one of the following tasks.
• For UNIX, log in as root. From a terminal window, type
xosdprtmgr
, then press
Enter
or
Return
.
• For Linux, type
sudo xeroxprtmgr
, then press
Enter
or
Return
.
Printing with xeroxprint
Xerox has its own print command. You can use the following command:
xeroxprint -d<Some_Queue> -o[Options] <Somefile>
Printing from a Linux Workstation
To print from a Linux workstation, install either a Xerox ® print driver for Linux or a CUPS print driver.
You do not need both drivers.
Xerox recommends that you install one of the full-featured custom print drivers for Linux. To locate
drivers for your printer, see www.xerox.com/office/drivers .
If you use CUPS, ensure that CUPS is installed and running on your workstation. The instructions for
installing and building CUPS are contained in the CUPS Software Administrators Manual , written and
copyrighted by Easy Software Products. For complete information on CUPS printing capabilities, refer
to the CUPS Software Users Manual available from www.cups.org/documentation.php .