Xerox Phaser 3110 Скачать руководство пользователя

Страница: 21 / 79

Troubleshooting

4-10

4-2-11 Ghost (3)

• Description

White ghost occurs in the black image printing at 32mm intervals.

Digital Printer
Digital Printer
Digital Printer

32mm

Check and Cause

Solution

1. The life of the developer may be expired.

2. The abnormal voltage and bad contact of

the terminal of the supply roller

1. Occur in the developer cartridge, replace

the developer and try to print out.

2. Check the approved voltage of the supply

roller and contact of the terminal and adjust
if necessary.

4-2-11 Ghost (3)

• Description

White ghost occurs in the black image printing at 32mm intervals.

Check and Cause

Solution

1. The life of the developer may be expired.

2. The abnormal voltage and bad contact of

the terminal of the supply roller.

1. Occur in the developer cartridge, replace

the developer and try to print out.

2. Check the approved voltage of the supply

roller and contact of the terminal and adjust
if necessary.

4-2-12 Ghost (4)

• Description

Ghost occurs at 47mm intervals.

Digital Printer
Digital Printer
Digital Printer

47mm

Check and Cause

Solution

The temperature of the fuser is maintained
high.

1. Disassemble the fuser and remove the

contaminated toner particles on the roller
and clean the foreign matter between
Thermistor and Heat roller.
( Caution: can be deformed)

4-2-13 Satins on the Face of Page

• Description

The background on the face of the printed page is stained.

Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer

Check and Cause

Solution

1. Toner leakage due to improperly sealed

developer.

2. If the transfer roller is contaminated, satins

on the face of page will occur.

1. Replace the developer cartridge.

2. If the transfer roller is contaminated, run PC

Cleaning Mode Print 2 or 3 times.
And perform Self-Test 2 or 3 times to

remove contamination.

Содержание Phaser 3110
















































































Результаты поиска

Содержание Phaser 3110

Отзывы:

Похожие инструкции для Phaser 3110

Бренды по названию

Популярные бренды

Xerox Phaser 3110, Руководство по обслуживанию

Результаты поиска

Содержание Phaser 3110

Отзывы:

Похожие инструкции для Phaser 3110

Бренды по названию

Популярные бренды