Quick Network Install Guide
29
Dynamic addressing (BootP)
The TCP/IP address is assigned automatically by the Server. Follow
the steps below:
1.
Press
Menu Up
or
Menu Down
until you see:
Menu
Ethernet Menu
2.
Press
Item Up
or
Item Down
until you see:
Ethernet Menu
IP Address Resolution
3.
Press
Value Up
or
Value Down
until you see:
IP Address Resolution
BootP
4.
Press
Enter
.
5.
Update the BootP server's
/etc/ethers
or
/etc/bootptab
and the
/etc/hosts
files with a host name, TCP/IP and Network addresses.
Consult your UNIX documentation for more BootP server
configuration details.
6.
Power off the Printer.
7.
Power the printer on and allow time for an IP address to be
assigned by the BootP server (this time may vary depending on
network traffic).
8.
Perform the steps contained in the section of this document
entitled
Appendix A: Print the Configuration Sheet
.
9.
Obtain the TCP/IP address from the Configuration Sheet.
