Xerox Nuvera, Руководство по началу работы

Страница: 9 / 30

Laser Safety
North America
This product complies with safety standards and is certified as a Class
1 Laser product under the Center for Devices and Radiological Health
(CDRH) of the United States Food and Drug Administration (FDA)
implemented regulations for laser products. This product complies
with FDA 21 CFR 1940.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated July 26, 2001. These
regulations apply to laser products marketed in the United States. The
label on the machine indicates compliance with CDRH regulations and
must be attached to laser products marketed in the United States. This
product does not emit hazardous laser radiation.
CAUTION: Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
exposure of laser light.
Since radiation emitted inside this product is completely confined
within the protective housing and external covers, the laser beam
cannot escape from the machine during any phase of the user
operation.
This product contains laser-warning labels. These labels are intended
for use by the Xerox Service Representative and are placed on or
near panels or shields that require special tools for removal. Do not
remove any of the panels. There are no operator serviceable areas in
these covers.
Europe EU
This product complies with IEC's safety standard 60825-1 (Edition
1.2) issued August 2001.
The equipment complies with laser product performance standards
set by governmental, national, and international agencies as a Class 1
Laser Product. It does not emit hazardous radiation, as the beam is
totally enclosed during all phases of customer operation and
maintenance.
CAUTION:
Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure
.
This product contains laser-warning labels. These labels are intended
for use by the Xerox Service Representative and are placed on or
near panels or shields that require special tools for removal. Do not
remove any of the panels. There are no operator serviceable areas
inside these covers.
If you need additional safety information concerning the product or
Xerox supplied materials, you may call the following number:
+44 (0) 1707 353434
Xerox Nuvera Getting Started Guide 9