Xerox Nuvera Series, Руководство по началу работы

Страница: 8 / 30

Electrical Safety
Use only the power cord supplied with this equipment.
Plug the power cord directly into a correctly grounded electrical outlet.
Do not use an extension cord. If you do not know whether or not an
outlet is grounded, consult a qualified electrician.
Do not use a ground adapter plug to connect this equipment to an
electrical outlet that lacks a ground connection terminal.
You may incur a severe electrical shock if the outlet is not grounded
correctly.
Do not place the Xerox Nuvera Printer where people may step or trip
on the power cord. Do not place objects on the power cord.
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings. These openings prevent
overheating of the machine.
Never push objects of any kind into slots or openings on this
equipment. Making a contact with a voltage point or shorting out a
part may result in fire or electrical shock.
Emergency Power Off
If any of the following conditions occur, immediately switch off the
power to the machine and disconnect the power cord from the
electrical outlet. Call an authorized Xerox service representative to
correct the problem.
The machine emits unusual noises or odors.
The power cord is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device is tripped.
Liquid is spilled into the Xerox Nuvera Printer.
The machine is exposed to water.
Any part of the machine is damaged.
Disconnect device
The power cable is the disconnect device for this equipment and is
attached to the back of the machine as a plug-in device. To remove all
electrical power from the machine, disconnect the power cable from
the electrical outlet.
WARNING:
This product must be connected to a protective earth
circuit.
8 Xerox Nuvera Getting Started Guide