2. Select the [add] button from the Network Agent setup window.
3. In the Add/Edit Network Agent Window select DocuTech Decomp Service radio button.
4. Under the server name, type in the IP Address or the host name of the Nuvera printer.
5. Under the Queue Name, type in the queue name on the DocuTech /Nuvera 120 C/P.
Note: The queue name will be the name of the controller followed by upper case VP.
6. Under Printer Model/Server Type select the [Xerox DocuTech 120 C/P: DocuSP Server
4.0] option in the drop down menu.
7. Input the user name and password of an account that has Read, Write and Delete rights to
the created directory.
Note – The users and Groups can be located on the DocuTech /Nuvera120 C/P under
Setup. In the Setup drop down menu select the Users & Groups option to get the users
list.
8. Under Server Path enter the full path name of the save location that was input in step 2 at
the DocuTech /Nuvera 120 C/P. In this example it is /var/spool/XRXnps/saved/digipath.
9. Do not select the [Log Errors] checkbox here, as it will cause erroneous errors to be
generated if it is turned on.
10. In the [Saved Jobs To] area select a Windows File System or Cabinet location to save the
files to when Nuvera sends them back.
11. Select [OK] and select [Done].
At the DigiPath create a Production Printer
1. Go to Printer Administration and select Printer Settings.
2. In Printer Settings add the DocuTech /Nuvera 120 C/P printer entering printer name, print
server ip address or hostname, queue name and printer model as Xerox DocuTech 120
C/P: DocuSP 4.0.
3. Select [OK].
At the DigiPath in Quick Print
1. In Quick Print or Production Print the user will select the [Job Setup] option before
submitting the job.
2. In the Destination field, set the destination to save.
3. A save dialog will appear and the IP Address of the DocuTech /Nuvera 120 C/P will
appear in the server name section of the window. In the server location the user will type
in the directory where the jobs will be saved. In this case the directory name is digipath.
Do not type in the whole server path, just type in the save directory name.
At DocuTech /Nuvera 120 C/P
1. Select [Print] option to the left of the screen.
2. Click on the job that the user sent to the queue.
3.
In the job ticket of this job you will change the type to [Single Page Tiff] from
[Multi-Page Tiff].
At Dig iPath
1. The user should check the directory that was set up to save jobs to during the Network
Agent set up.
