NPS/IPS Extension Operations Guide
ix
Introduction
This document provides all the information you need to install, set
up, and operate the NPS/IPS Extension option on the DocuPrint
100/115/135/155/180 EPS. It also describes the procedure for
switching between operating modes and provides troubleshooting
information. This document is intended for the site system
administrator who is responsible for installing and setting up the
NPS/IPS Extension option, and for the Operator who is
responsible for the day-to-day operations.
About this guide
Before using this documentation, become familiar with its contents
and conventions.
Contents
This guide contains the following:
•
Chapter 1, “Product overview,” provides detailed explanations
of the NPS/IPS Extension option.
•
Chapter 2, “Installation planning,” gives you the information
that you need to prepare for installation of the NPS/IPS
Extension software.
•
Chapter 3, “Changing print modes,” provides procedures for
switching between EPS, and NPS/IPS operating systems.
•
Chapter 4, “Problem solving,” provides troubleshooting
information about switching between print modes.
•
An index is provided at the end of this document.
Conventions
This guide uses the following conventions:
•
Initial capital and angle brackets:
Within procedures, the
names of keys are shown with an initial capital and within
angle brackets (for example, press <Enter>).
•
Angle brackets:
Variable information, or the position of a
specified argument in the command syntax, appears in angle
