Managing your paper supply
Xerox Nuvera
2-6
Paper Guide
Using storage bags for unused paper
Paper that has been unwrapped and not used, such as paper left over at the end of a shift,
should be repackaged or protected with a moisture proof wrapper or plastic bag.
To help protect unwrapped paper, three storage bag kits are available for purchase from Xerox.
•
Small bag kit - 20 small size plastic bags and instructions for storing 8.5 x 11 inch (A4) and
8.5 x 14 inch stocks.
Part number 604K17520
•
Medium bag kit - 20 medium size plastic bags and instructions for storing 11 x 17 inch (A3)
and 12 x 18 inch (A3+) stocks.
Part number 604K17510
•
Large bag kit - 20 large plastic bags and instructions for storing oversize stocks up to 14.33
x 20.5 inches (364 x 520 millimeters).
Part number 604K17500
For ease of handling and to minimize handling damage, each bag holds about 2 inches (50
millimeters) of paper.
According to the kit directions, information identifying the stock is written on a heavyweight
sheet of paper, which is then wrapped around one side of the stack to act as a protective sleeve.
The stock is grasped at the sleeve end and slid into a storage bag. A flap, at the bag opening, is
folded snugly over the stack to remove air from the bag. The bagged stock is then flipped over
so the weight of the stock will keep the bag closed.
In addition to protecting paper from high and low humidity, the bags reduce or eliminate
airborne fibers and debris that typically accumulate on unwrapped paper. Running paper with
airborne debris may cause steaks on prints due to printer contamination.
Weekend shutdown
The system room environment should be kept within the temperature and relative humidity
operating limits, which are identified in the following table.
Note
If the environment drifts outside of the operating limits while the printer is shut down,
image quality will be degraded upon startup and until the environment within the printer
becomes stabilized. Paper that was left in the paper trays may need to be replaced with
fresh paper.
For weekend shutdown:
•
Shut down the printer by following the Powering Off the System procedure in the
Xerox
Nuvera User Guide and Training Aid
.
•
Start up the Xerox Nuvera System by following the
Powering On the Xerox Nuvera
procedure
in the
Xerox Nuvera User Guide and Training Aid
.
Environmental Condition
Operating Limits
Temperature range
50
°
to 90
°
F
10
°
to 32
°
C
Relative humidity range
15% to 85% uncoated paper
15% to 85% coated paper
Содержание Nuvera 100 roduction Systems
Страница 30: ...Managing your paper supply Xerox Nuvera 2 12 Paper Guide...
Страница 44: ...Tips by stock type Xerox Nuvera 3 14 Paper Guide...
Страница 69: ......
Страница 70: ......