Xerox N2025/N2825 Скачать руководство пользователя страница 143

Страница: 143 / 176

Solving Printing Problems

Chapter 5: Troubleshooting

❖

5-27

Solving Printing Problems

If you have any problems with the operation of your
printer, refer to Table 5.2 for suggested remedies.

Table 5.2

Printer Operation Problems

Problem

Action

The printer will not print
at all, or a file sent from
the client/server will not
print.

• Check with your network administrator to see that the printer is powered up,

connected to the network and that the network is operational.

• Check Control Panel messages for “Paper Jam,” “Close Covers,” etc.

• If the port (parallel or network) the printer is connected to is disabled, enable

it. Check the Configuration Sheet for the port you are using to see if the Port
Enable item in the appropriate Interface Menu is set to

. If it is set to

Off

set it to

and try again.

• If the printer has printed recently, do the following:

- Attempt to print a Configuration Sheet. If it does not print, contact your

customer support center.

- If the Configuration Sheet prints, check to see that the printer is configured

properly.

- If the printer is configured properly, check the Configuration Sheet to

confirm that the correct emulation is (PDL) enabled for the port or
protocol you are using.

- If the correct emulation is (PDL) enabled and the printer continues not to

print, contact your customer support center.

Table 5.2 Page 1 of 4

Содержание N2025/N2825

















































































































































































Результаты поиска

Содержание N2025/N2825

Отзывы:

Похожие инструкции для N2025/N2825

Бренды по названию

Популярные бренды

Xerox N2025/N2825, Руководство пользователя

Результаты поиска

Содержание N2025/N2825

Отзывы:

Похожие инструкции для N2025/N2825

Бренды по названию

Популярные бренды