INTRODUCTION
Integrated Fiery Color Server
1-4
8/09
CONFIGURATION TRAINING GUIDE
Network Connectivity
When the Fiery is connected to a network, it behaves as a
networked printer. The Fiery supports the following network
protocols (rules that enable computers on a network to
communicate with each other):
AppleTalk,
Bonjour
TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP,
IMAP, IPP, IPv4, IPv6, LDAP, LPD, NBT, POP3, Port 9100,
SMB, SMTP, SNMP, SNTP, SSL/TLS, 802.1x and IPSec
protocols
These protocols can run concurrently on the same cable.
Computers that use other protocols can print through a server that
uses one of the supported protocols. The Fiery is autosensing, and
handles all connections simultaneously. This information needs to
be managed by a local administrator.
How the Fiery Network Controller Operates
To gain an understanding of how the Fiery Color Server Operates,
consult the Integrated Fiery Color Server for the WC 7700 Series
MFP Installation and Service Guide, Introduction.
Service Documentation
This training document is intended to provide general procedures.
For specific detailed procedure, refer to your service
documentation.
