Xerox FreeFlow, Руководство оператора и администратора

Страница: 141 / 308

FreeFlow Process Manager Operator and Administrator Guide
2-89
Workflow Builder
12. In the Margins area, select or type the margin for each option:
[ Top ], [ Left ], [ Bottom ], and [ Right ]; or select [ Uniform ] to
change all settings to the Top setting.
13. In the Page Position and Autofit area, select from the
following:
•
In the Positon Relative to area, designate a PDF box,
either [
PDF Crop Box ], [ PDF Trim Box ], [ PDF Bleed
Box ], and [ PDF Art Box ], upon which the size of the cells
that are being imposed is based.
14. You can specify a horizontal and vertical cell-relative position
for the PDF image (logical page) within an imposed sheet cell,
and thereby reduce the amount of cut and trim post-printing.
Select from the following:
•
[ Horizontal ] to specify the horizontal anchor position
reference edge of the image alignment. Available if not
centered. Select from the following:
– [
From left ] , [ From right ] , [ Center ]: Always available.
– [ From binding edge ]: Available if 2-sided document.
– [ From non-binding edge ]: Available if 2-sided
document.
• [ Vertical ] to specify vertical anchor position reference
edge of the image alignment. Available if not centered.
Select from the following:
– [
From top ] , [ From bottom ] , [ Center ]: Always available
– [ From binding edge ]: Available if Head-to-toe
document.
– [ From non-binding edge ]: Available if Head-to-toe
document.
NOTE: Earlier versions of Process Manager (2.0, 3.0, 4.0)
used the uni-dimensional Anchor Image function. Legacy
workflows will be translated into a 2-dimensional format.
Horizontal and vertical values will be 0.00. Edge settings will
be translated into the appropriate dimensional control element,
taking into consideration document plex.
NOTE: Page imagery is typically allowed to bleed beyond the
selected PDF box. However, the selected PDF box can act to
crop imagery that lies beyond it if the user specifies a margin
of any size or dimension.