Introduction
Chapter 1: Getting to Know Your Printer
❖
1-3
Introduction
In this chapter you will become familiar with the features
of your printer and learn where to locate specific printer
parts.
Before you use your printer, make sure that you perform
all the steps outlined in the
Quick Install Guide
that came
with the printer and install the necessary cables.
Your printer may have one or more optional features
installed. First verify your exact equipment options before
proceeding further. If you see features described in this
section that are not available with the equipment you
have, you can easily add them yourself. For more
information, see the separate
Supplies/Options Guide
provided with your printer.
There are two different printer configurations:
• The tabletop configuration.
• The console configuration (sitting on top of the
optional 2,500 Sheet Feeder).
Samples of each configuration are shown later in this
chapter; however, the figures throughout this guide may
show either configuration when illustrating a feature or
procedure.
