Xerox DocuPrint N3225, Руководство системного администратора

Страница: 60 / 325

Using the Menu System
1-52
❖
System Administrator Guide
Table 1.18 Serial Menu functions
Menu Item and Function Keystrokes Display
Port Enable
Enable or disable the serial port. The
available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Serial Menu
2. Press Item Up or Item
Down
until you see:
Serial Menu
Port Enable
3. Press Value Up or Value
Down
until you see:
P o r t E n a b l e =
New Value
4. Press Enter . You will see:
Serial Menu
Port Enable
5. Press On Line . You will see:
Ready
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds ( 30* )
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either
Value Up
or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the values.
1. Press Menu Up or Menu
Down
until you see:
Menus
Serial Menu
2. Press Item Up or Item
Down until you see:
Serial Menu
Port Timeout
3. Press Value Up or Value
Down
until you see:
P o r t T i m e o u t =
New Value
4. Press Enter . You will see:
Serial Menu
Port Timeout
5. Press On Line . You will see:
Ready
Table 1.18 Page 1 of 3