Xerox DocuPrint N24, Руководство системного администратора

Страница: 69 / 398

Automatic Tray Switching
Chapter 2: Paper Handling
❖
2-21
Following is a description of the settings and rules for
using the Tray Sequence function, along with examples of
its use. For more information on using the Control Panel
to set Tray Sequence, refer to Chapter 3: Using the
Control Panel.
Tray Sequence
Settings
The Tray Sequence item in the Control Panel’s Tray Menu
can be set to any of the settings shown in Table 2.2 below
(and to Off).
The 50 Sheet Bypass Feeder is referred to as the MBF (for
Multiple Bypass Feeder) in the Control Panel’s Tray
Sequence settings.
Table 2.2 Tray switching options in the Tray Menu
Tray Sequence Settings Description
MBF-1
MBF-1-2
1-2
Off
Tray Sequence settings available
with base configuration printer.
The default settings are either
MBF-1-2 when the 50 Sheet
Bypass Feeder is installed or
1-2
when the optional 100 Envelope
Feeder is installed.
MBF-4-5
MBF-4-5-1
MBF-4-5-1-2
MBF-4-5-1-2-3
1-2-3
4-1
4-1-2
4-1-2-3
4-5-1
4-5-1-2
4-5-1-2-3
Additional Tray Sequence settings
available when the 2,500 Sheet
Feeder is installed.
The default settings are either
MBF-4-5-1-2-3
when the 50 Sheet
Bypass Feeder is installed or
4-5-1-2-3
when the optional
100 Envelope Feeder is installed.