Xerox DocuPrint N24, Руководство системного администратора

Страница: 190 / 398

Using the Hard Disk Drive for Secure and Proof Jobs
5-10
❖
DocuPrint N24, N32, and N40 System Administrator Guide
Creating Proof
Jobs
Click for Updated Information
Proof printing lets you print a single copy of a multiple copy
job. You assign a password and copy count at your
workstation or computer before printing. The first set is
printed immediately. You can then go to the printer and
proofread (proof) the first set. Depending on the outcome of
the proofing, you can then decide either to continue printing
the remaining sets or to delete the job after entering your
password on the Printer Control Panel.
Proof jobs, if not sent by a driver with the proof job feature,
may be invoked in both PCL and PostScript by preceding the
job with the following PJL commands:
@PJL XPROOFJOB
@PJL XJOBPASSWORD = "number"
These commands must be immediately followed by a
standard PJL “JOB” command that includes the “jobname”
and the PJL command “XJOB PASSWORD”.
The printer continues processing all subsequent data as part
of the proof job of name “job name.” The proof job is stored
with the name “job name” and associated with the password
defined in the PJL XPASSWORD command. The proof job
ends when the PJL End of Job command is received (i.e.,
@PJL EPJ). The “EOJ” command should be followed by a
UEL.