manualshive.com logo in svg

Xerox DocuPrint N24, Руководство по обслуживанию, Страница: 1017 / 1032

Поделиться
Скачать
Xerox DocuPrint N24 Скачать руководство пользователя страница 1017

3/99

DocuPrint N24, N32 and N40 Service Manual

8-579

Options

8.6.5  ACOM MICR Enhanced User’s Guide

8.6.5.1  Introduction

Congratulations on the purchase of your new ACOM MICR Enhanced XEROX DocuPrint N24/N32/N40 
Laser Printer! Your new DocuPrint N24/N32/N40 has been specially upgraded by ACOMN with the fol-
lowing MICR Enhancements...

•

Specialized ACOM N24/N32/N40 MICR Toner

•

Unique N24/N32/N40 E13-B MICR Soft & TrueType Fonts

•

N24/N32/N40 Engine Fusing Enhancements for MICR Printing

•

ACOM MICR Toner Sensors

•

ACOM’s QUICKCHECK Software Compatibility

•

Dual-Mode MICR Keylock Option (Model 2 Only)

•

ACOM’s Secure-A-Font Module Option (Anytime Add-On Option.)

This manual covers both printer models currently available from ACOM, and the newly released 
SECURE-A-FONT MODULE which can be purchased as an add on option. The Model 1 printer is a 
dedicated MICR check printer with all of the above listed features, except for the last two options. The 
Model 2 printer is a Dual-Mode printer that has all of the same features as Model 1, and includes the 
MICR Keylock option. Both models are compatible with ACOM’s QUICKCHECK Software products.

8.6.5.2  Technical Support

Should you need technical assistance with your new XEROX DocuPrint N24/N32/N40 Printer or have 
any questions regarding any material covered in this manual, please call ACOM’s Technical Support 
Line at 800-217-ACOM (2266). You can reach ACOM TECH SUPPORT by Monday-Friday 6:30am – 
5:00pm PST, excluding holidays or by sending E-mail to [email protected].

NOTE: When any service is required on your ACOM MICR ENHANCED XEROX DocuPrint N24/N32/

N40 Laser Printer, you MUST ALWAYS call ACOM TECH SUPPORT DEPARTMENT to open a 
service call. This is to ensure that the correct information regarding the nature of your printer 
problem is forwarded to the XEROX FIELD ENGINEER before being dispatched to your site.

NOTE: The above statement is to HELP XEROX SERVICE. ACOM does not want to have XEROX 

Service Personnel go to a ACOM Printer if the problem is related to MICR or their respective 
hardware changes.

Содержание DocuPrint N24









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов