Xerox DocuPrint N2025, Руководство системного администратора

Страница: 38 / 256

Using the Menu System
1-22
❖
System Administrator Guide
Tray Menu The Tray Menu and its available items are described in
Table 1.10.
Table 1.10 Tray Menu Items
Menu Description
Tray Menu Allows you to access tray settings for PCL and PostScript jobs.
Menu Items Description
MBF Size Defines the paper size that is loaded in the MBF.
MBF Type
Defines the paper type that is loaded in the MBF.
Tray N Type Defines the type of paper installed in Tray N (where N is the
tray number—Tray 1, 2, or 3).
Tray Sequence Groups two or more trays together so the group appears as
one logical tray, and defines the order in which the trays will
be searched to satisfy the input request.
Custom Size
Defines the paper size that is used in formatting pages
printed from the tray(s) if
Tray N Mode is set to Custom
(which overrides the tray’s auto size detection mechanism).
Tray N Mode Determines whether or not the auto size detection
mechanism in tray
N (where N is the tray number—Tray 1, 2,
or 3) should be overridden with the setting for Custom Size .
Config Fuser Enables the setting of fuser temperatures associated with
each paper type. If set to
On , paper types are available as
menu items.
Plain Sets the fuser temperature to be associated with the paper
type
Plain
(appears only if
Config Fuser
is set to
On
).
Preprinted Sets the fuser temperature to be associated with the paper
type
Preprinted
(appears only if
Config Fuser
is set to
On
).
Table 1.10 Page 1 of 2