Appendix B: Set an IP Address
48
❖
Quick Network Install Guide
Dynamic Addressing (RARP/BOOTP)
The TCP/IP address is assigned automatically by the
Server. Follow the steps below:
1
Press
Menu Up
or
Menu Down
until you see:
M e n u s
E t h e r n e t M e n u
2
Press
Item Up
or
Item Down
until you see:
E t h e r n e t M e n u
I P A d d r e s s R e s .
3
Press
Value Up
or
Value Down
until you see:
I P A d d r e s s R e s .
B O O T P / R A R P
4
Press
Enter
.
5
Update the RARP/BOOTP server's
/etc/ethers
or
/etc/bootptab
and the
/etc/hosts
files with a host name,
TCP/IP and Network addresses. Consult your UNIX
documentation for more RARP/BOOTP server
configuration details.
6
Power Off the Printer.
7
Power the printer ON and allow time for an IP address to
be assigned by the RARP/BOOTP server (this time may
vary depending on network traffic).
8
Perform the steps contained in the section of this
document entitled
Appendix A: Print The
Configuration Sheet
.
9
Obtain the TCP/IP address from the Configuration Sheet.
