Xerox DocuPrint N17, Руководство по обслуживанию

Страница: 331 / 558

7/99
Xerox DocuPrint N17 Service Manual 7-81 Repair Analysis Procedures (RAPs)
Deletions (Line, Band, Spot)
Inspect Test Prints for the presence of deletions (missing image). There should be no deletions
with a diameter larger than 0.5 mm visible on test prints (Figure 7.5.3.3).
1 There are deletions on the test prints.
Y: Go to step 2.
N: Go to Fusing checkout on the next page.
2 There are vertical (in direction of paper movement) Line/Band deletions present.
Y: Go to
RAP 7.5.7 Vertical Band Deletions.
N: Go to step 3.
3 There are Horizontal (in direction of scanning) Line/Band Deletions present.
Y: Go to RAP 7.5.6 Horizontal Band Deletions.
N: Go to step 4.
4 There are Spot Deletions present.
Y: Go to RAP 7.5.8 Spot Deletions.
N: The defect apparently is not manifesting as a deletion. Continue to the Fusing checkout
on next page.
Figure 7.5.3.3 Line, Band, or Spot Deletions
asm7-14 asm7-12 asm7-18
www.printcopy.info
www.printcopy.info