CONTROLLER SPECIFICATIONS AND REQUIREMENTS
5-4
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
Sun Ultra 2 workstation placement
Following are guidelines for placement of the Sun Ultra 2 workstation
components of the printer controller.
Figure 5-2.
Sun Ultra 2 printer controller hardware
1
Mouse and mouse pad
2 Keyboard
3 Monitor
4 Processor
5 Table
When you place your workstation processor on a table top, make
sure to allow at least 6 inches / 152 mm of unobstructed space at the
rear and both sides of the processor. Do not allow any piece of
equipment to blow warm air into the air-intake vents of the processor.
Caution:
Do not place a monitor with a base larger than the
processor on top of the unit. Do not block any fan or vents on the
sides or rear of the processor.
