Xerox DocuPrint 4635 Laser, Руководство по генерации системы, Страница: 24 / 78

SYSGEN CONFIGURATION OPTIONS
3-4 XEROX 4635 LASER PRINTING SYSTEM — SYSTEM GENERATION GUIDE
Option Description
0) None Returns you to the base system configuration display screen.
1) Full memory test Determines the amount of system memory test at power on.
2) Auto boot Determines whether auto boot is enabled at power on.
3) Message display Determines whether boot diagnostic messages display at power on.
4) Shared disk Adds or removes the shared disk option.
5) MICR mode default Adds or removes the MICR mode default option.
6) On-line interface (if
installed)
Displays the following question:
DOES THIS SYSTEM HAVE AN ONLINE INTERFACE?
ENTER 'Y' OR 'N'.
If you enter N, the online feature is removed from the system being
generated.
If you enter Y, the configuration options are automatically selected by the
system and the display returns to the base configuration.
7) Xerox Print Service
Manager
Adds or removes the Xerox Print Service Manager (XPSM).
8) Kanji Adds or removes Kanji.
9) Ethernet (if installed) Displays the following question:
IS THIS SYSTEM CONNECTED TO A XEROX ETHERNET? ENTER 'Y' OR 'N'.
If you enter N, the Ethernet feature is removed from the system being
generated.
If you enter Y, the following suboptions display:
ETHERNET CHANGE LIST:
1) NONE
2) READ PRINTER'S ADDRESS
3) ETHERNET NETWORK ADDRESS
Selecting
NONE
results in no Ethernet changes.
Selecting
READ PRINTER'S ADDRESS
results in the printing system providing its
internal address as a parameter to the sysgen processor. This address is
shown in figure 3-1, Base system configuration for 4635, in both
hexadecimal and decimal format. The decimal value is preceded by an
asterisk (*). (The printing system internal address is set by Xerox at the time
of manufacture.)
Selecting
ETHERNET NETWORK ADDRESS
results in a prompt for the address of the
Ethernet network. You may enter this address in either hexadecimal or
decimal form. For a decimal value, enter an asterisk followed by the address
(for example, *355). A value not preceded by an asterisk is assumed to be
hexadecimal. (The network address is assigned by Xerox. Consult your
network system administrator for the correct assignment.)