background image

Optimizing print quality

6-4

Troubleshooting Guide

Product features that affect PostScript print quality

You can improve the appearance of your documents by being 
aware of potential problems created through the use of 
proprietary PostScript extensions and device-dependent 
operators.

Proprietary PostScript extensions

PostScript masters that use proprietary printer features may 
cause appearance inconsistencies between different PostScript 
printers. Some PostScript printers contain proprietary PostScript 
extensions. For example, some versions of the Apple Macintosh 
PostScript driver download encrypted proprietary image 
“smoothing” operators to Apple LaserWriters. The downloaded 
PostScript code uses the product operator to determine if it is 
being used on a LaserWriter. If not, the proprietary code is 
bypassed by doing a flushfile. This allows the PostScript master 
to print on non–LaserWriter products. As a result, PostScript 
masters generated on a Macintosh with Apple proprietary 
features may produce output that varies between LaserWriter 
and non–LaserWriter PostScript printers.

Device-dependent operators

Some PostScript operators result in device-dependent PostScript 
files. “Device dependence” means that devices having different 
output characteristics may produce different-looking output even 
though they use the same software. This section documents the 
most serious examples of device dependence. The PostScript 
Language Reference Manual,
 second edition, lists all of the 
graphics state operators that are considered device-dependent.

Gray shading—setscreen and setcolorscreen

The PostScript operators setscreen and setcolorscreen control 
the PostScript halftone software that simulates various intensity 
levels of gray and color inks. Since each PostScript product may 
have a different default halftone definition, the halftone patterns 
and gray scale range may differ also. Because setscreen is 
inherently device dependent (especially when used for pattern 
fills), PostScript masters look different on almost every different 
model of PostScript printer.

Содержание DocuPrint 155





































































Отзывы: