![background image](http://html1.mh-extra.com/html/xerox/document-workcentre-480cx/document-workcentre-480cx_online-users-manual_3939665087.webp)
Book
TOC
Chapter
TOC
Search
Quit
3-11
Confirming a Transmission
A Message Confirmation report shows whether the transmission
was successful and how many pages were sent.
When the last page of your document has been sent successfully,
the machine beeps and returns to Standby mode.
To print a Message Confirmation report:
1
Press the Menu button.
2
Press the TX Confirm (16) button on the One-Touch keypad.
3
The machine prints out a Message Confirmation report.
You can also configure your machine to print out a confirmation
report automatically each time a fax is sent.
To automatically print a confirmation report:
1
Press the Menu button.
2
Press the System Data button (01) on the One-Touch keypad.
3
Press the Down or Up buttons repeatedly until MESSAGE
CONF. appears in the display.
a)
Press 1 to print a confirmation report automatically each
time you send a fax (ON).
Or
Next Page
Previous Page
Содержание Document WorkCentre 480cx
Страница 1: ...To Quit Acrobat Thank you please click on the X in the corner...
Страница 178: ...Book TOC Chapter TOC Search Quit 5 16 Next Page Previous Page...
Страница 185: ...Book TOC Chapter TOC Search Quit 5 23 Next Page Previous Page...
Страница 294: ...Book TOC Chapter TOC Search Quit 8 8 8 Close the control panel firmly until it clicks into place Next Page Previous Page...