Xerox WorkCentre 450c/450cp Service Manual
Page 4-19
REP 2.1.14: Cartridge Lock
Lever
Parts List: 2.1
Perform the following:
1.
Remove the ink cartridge.
2.
Squeeze the carriage together as shown in
Figure 4-22.
Figure 4-22 Carriage lever removal
3.
Lift up on the latch and tilt to the right as you move the
bottom of the latch to the left (Figure 4-23).
Figure 4-23 Removing lever and cam
4.
Place the lever cam in the new lever as shown in Figure 4-24.
Figure 4-24 Lever and cam assembly
5.
Squeeze the carrier together and insert the lever and
cam into the carrier (Figure 4-23).
www.printcopy.info
www.printcopy.info
