4.
q
Press the
Feed
button for approximately one
second and release (See Figure 2). This will engage
the feed rollers for a short period of time and allow the
Feed Roll Cleaning Pad to clean and restore the
surface texture of the feed rollers. Repeat this
process approximately 10 times.
6.
q
Reverse the Feed Roll Cleaning Pad in the
paper Tray (long edge down) with the white side facing
out.
7.
q
Press the
Feed
button for approximately one
second and release. This will allow the Feed Roll
Cleaning Pad to clean off the residue. Repeat this
process approximately 5 times.
8.
q
Remove the Feed Roll Cleaning Pad with the
¼ inch stack of paper and insert fresh 20 lb. paper.
Insert the Printer Output Tray and make a print.
•
This completes the Instructions.
Thank You for choosing
The Document Company
XEROX
Page 2 of 2
Feed Roll Cleaning Kit
SCAN
COPY
FAX
Scan
Mode
Feed
Cartridge
copy
Size
Job Status
Cover Page
Confirm
Contrast
Photo
Darken
Normal
Lighten
Resolution
Standard
Superfax
Fax
Ext/Clear
Enter
Menu
Figure 2. Pressing the Feed Button
Control Panel
Step 1
:
Press the
Feed
button for approximately one
second and release.
Xerox Corporation
Global Knowledge & Language Services
800 Phillips Road - Bldg. 845-17S
Webster, New York 14580-9791
USA
©2000 Xerox Corporation. All rights reserved.
Printed in the United States of America
XEROX®, The Document Company ®,
the stylized X and the identifying product
names and numbers herein are trademarks
of XEROX CORPORATION.
Any Questions? Call:
1 - 800 - TEAM XRX
(1 - 800 - 832 - 6979)
HINT:
It would be a good idea to save the
contents of this kit for future use if the Feed Rolls
become contaminated again.
F
DRB-FILE
709P00850 Rev A
March 2000
