CMS Option Tool
Xerox 490/980 Color Continuous Feed Printing System
2-8
Color Management Guide
Create Calibration Data
Use the Create Calibration Data tab to create a table to be used for calibration. This table is
generated based on measured colorimetric data. Select [
Resource Set at Destination
] to send
color resources to the printer.
How to Create Calibration Data
1.
Select the CMS Option Tool icon from the PC-GUI.
2.
Select the [
Create Calibration Data
] tab.
3.
Select the Paper Name from the pull-down menu.
4.
Select the desired data file for the printer(s). When selecting the data file for Halftone Dot,
the file will be *.ht. When selecting the data file for Error Diffusion, the file will be *.ed.
Select the first file for each.
5.
Select the Resource and set at destination or leave as System Default.
6.
Select [
Execute
].
For a detailed description of options on these selections, refer to the information in the
following section.
Select the paper type
All standard and registered types of paper will be listed. Select a paper type from this option.
Plain paper and Special paper are considered standard. All other paper types must be registered
through the Custom Paper option.
Содержание Document centre 490
