Xerox DocuColor 7000 Скачать руководство пользователя страница 110

Страница: 110 / 194

DocuColor 8000/7000 Operator Manual

3-36

3. Accessories

Ordering and Loading Staples

You can order new staple cartridges through the system you

normally use for ordering Xerox supplies. The cartridge number to

order is 8R12799. You should keep a supply on hand so

production is not interrupted while you are waiting for staples to be

shipped.

1. Open the front door of the HCSS80.
2. Push the yellow (1) lever down with your left hand. Grasp the

grey handle on the cartridge unit and pull it towards you until it

stops. Release the yellow level and the unit will lock into place.

3. Grasp the yellow staple cartridge and pull it towards you. The

entire unit will move forward, then the staple cartridge only will

pull free of the unit.

4. Insert a new cartridge into the unit, and push it until you hear it

click into place.

5. Push the yellow lever down and the cartridge unit

automatically swings back into place.

Gray
Handle

Содержание DocuColor 7000



































































































































































































Результаты поиска

Содержание DocuColor 7000

Отзывы:

Xerox DocuColor 7000, Руководство оператора, Страница: 110 / 194

Результаты поиска

Содержание DocuColor 7000

Отзывы: