Xerox DocuColor 5000 Скачать руководство пользователя страница 13

Страница: 13 / 108

DocuColor 5000 Administrator Guide

Safety notices

Europe (EU)

This product complies with IEC’s safety standard 60825-1 (Edition

1.2) issued August 2001.
The equipment complies with laser product performance

standards set by governmental, national, and international

agencies as a Class 1 Laser Product. It does not emit hazardous

radiation as the beam is totally enclosed during all phases of

customer operation and maintenance.

CAUTION:

Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.
This product contains laser warning labels. These labels are

intended for use by the Xerox Service Representative and are

placed on or near panels or shields that require special tools for

removal. Do not remove any of the panels. There are no operator

serviceable areas inside these covers.
If you need additional safety information concerning the product or

Xerox supplied materials, you may call the following number:

+44 (0) 1707 353434

Содержание DocuColor 5000













































































































Результаты поиска

Содержание DocuColor 5000

Отзывы:

Xerox DocuColor 5000, Руководство администратора, Страница: 13 / 108

Результаты поиска

Содержание DocuColor 5000

Отзывы: