![background image](http://html.mh-extra.com/html/xerox/docucolor-4-cp/docucolor-4-cp_supplementary-manual_884791011.webp)
Expectation Setting Document for
DocuColor 4 CP
Terms and product names used in this document may be trademarks or registered
page
11
Trademarks of their respective companies and are hereby acknowledged.
Vers. 2.4 dated: 9/29/99 AML, RD
Controller Specifications
•
MIPS 4700 Processor, 133 MHz CPU
•
64 MB RAM minimum memory (Expandable to 256 MB)
•
4.8 GB internal hard drive, standard.
•
10 BaseT /100 BaseT, 10Base-5 network interface standard
•
Parallel P1284
•
Token Ring network card (optional)
Network Specifications
Protocols Supported
TCP/IP
Novell IPX/SPX
SMB
AppleTalk
NetWare c4.1, v3.12, v3.11, v3.1
Token Ring network card (optional)
Automatic protocol switching and concurrent job receiving are supported in the DocuColor 4 CP.
Note: AppleTalk is not supported through Windows NT on the DocuColor 4 CP.
TCP/IP from Windows 95/98 requires a third party software package
Controller Features
Resolution
•
Print resolution for all paper sizes is 600 dpi x 600 dpi x 8 bits per pixel per color.
Billing Meters
•
The DocuColor 4 CP controller does not provide any meter counter.
Maximum Image Sizes
•
Maximum size paper for output: 330 x 457mm; 13 x 18 in
•
Minimum size paper for output: 80 x 140 mm; 3.5 x 5.5 in
•
Maximum printable area: 320 x 450mm; 12.6 x 17.7in
•
The maximum scan area for the DocuColor 4 CP is 297x431.8 mm (A3, 11x17).
•
There is no minimum scan area limitation.
PIN Authorization
•
There are two types of PIN authorization that can be enabled on the DocuColor 4 CP scanner:
User Authentication: To permit use of the copier
Administration Authentication: To permit changes to machine controls and settings
•
The PIN authorization for the printer and scanner are independent.
Frame Types Supported
Ethernet_II, Ethernet_SNAP
IEEE802.3, IEEE802.2