![background image](http://html2.mh-extra.com/html/xerox/docucolor-242/docucolor-242_release-note_3536515016.webp)
Page 16
and
y
=297. For Tray 5 (Bypass), load the paper so that the short end of the page feeds into the
copier. Note that the message that prompts you to load paper has the dimensions reversed
(297
x
220 instead of 220
x
297).
All custom page sizes sent to the DocuColor 242/252 and DocuColor 260 must be created
SEF (Short Edge Feed).
Custom page size (Mac OS X v10.2.8)
When you print from the Mac OS X v10.2.8 printer driver using a custom page size, the
custom page can have a maximum width of 33 cm (approx. 12.9 inches) and a maximum
height of 48.8 cm (approx. 19 inches). If you specify a page size that exceeds either or both of
these limits, the page size is not accepted and the job is set to print with the default page size.
To use a page size that exceeds the maximum width or height allowed by the printer driver,
you can print the job to the Hold queue and set the page size in Command WorkStation.
Custom page size and Tray 6 (Oversized) on Mac OS X
When you print from Mac OS X using a custom page size, set up the page size as follows to
enable the Fiery Color Server to display the correct page size in messages:
1 Open the file and choose Page Setup from the application’s File menu.
2 For Settings, choose Page Attributes. For Format for, choose the Fiery Color Server.
3 For Paper Size, choose Manage Custom Page Sizes.
4 Enter the specifications for the custom page size and click OK.
5 Click OK to close Page Setup.
6 Choose Print from the application’s File menu.
7 Choose the Fiery Color Server as your printer.
8 Choose Paper Handling from the drop-down list, select Scale to Fit Paper Size, and choose the
custom page size you created.
9 Choose Paper Feed from the drop-down list, select All Pages From, and choose Tray 6
(Oversized).
10 Click Print.
Custom Page Sizes and Hole Punching
Hole Punching is not supported for Custom page sizes of certain dimensions. The supported
range is length that is equal to a standard-size page and width from 182.0 to 432.0 mm
(approximately 7.2 to 17 inches). If your job exceeds the supported range, the Hole Punching
option is canceled.
Paper Source set to Auto Select
If you print a job with Auto Select as the paper source, the copier uses any of the Trays 1- 4,
or Tray 6. It does not use Tray 5, which is the Bypass Tray.