Xerox DocuColor 240, Руководство по выпуску

Страница: 3 / 34

Page 3
Part Number: 45045321
More Setup
Similar to WebSetup, More Setup in WebTools lets you set printing defaults, configure
network services, and perform administration tasks. For some Setup options in WebSetup
or Command WorkStation, you must set additional options in More Setup. The tabs under
More Setup are described in
Configuration and Setup along with their related Setup options
or tasks.
Changing the time in WebSetup
When you change the time and date using the DocuColor 250/240 tools mode, the change
applies to the copier only, not the Fiery. To change the time and date on the Fiery, use
WebSetup. The time on the Fiery is shown in the header of reports such as the Job Log
and Configuration page.
Cannot disable Web Services
You cannot disable Web Services in WebSetup, because there is no way to re-enable Web
Services. If you deselect the option and reboot the Fiery, the option is once again selected
when you view it.
Accessing WebSetup
If you are unable to access WebSetup by entering the DNS name of the Fiery in Internet
Explorer, perform the following steps:
1 Start WebSetup by entering the IP address of the Fiery in Internet Explorer.
The Accessing WebSetup window appears, displaying instructions for configuring
Internet Explorer.
2 Follow the instructions displayed in the window.
If the Java Custom Settings button is not visible, scroll to the Microsoft VM area of the
Custom Level dialog box, and select Custom under Java Permissions.
3 Repeat the instructions, but select the Local Intranet zone, instead of Internet. Configure the
Local Intranet options using the same settings that were used for the Internet zone.
FTP Proxy Setup
To use the FTP Proxy service, you must first enable FTP Services.
Printing from Tray 5 (Bypass Tray) by default
To set a default for jobs to use the Bypass Tray, specify the tray at print time in the printer
driver. There is no Setup option by which the administrator can set a default.
WINS Address
The WINS Address does not appear in WebSetup in DHCP mode when you configure
Network Setup. Print a Configuration page to see the WINS address.