2
2-17
Using the EFI Spectrometer ES-1000 and EFI Densitometer ED-100
Setting up the ED-100
To use the ED-100 for calibration purposes, you must first set it up for use with your
computer. For complete instructions on setting up the ED-100, see the documentation
that is included with the instrument.
The following illustration shows the different components of the ED-100.
Calibrating the Fiery with the ES-1000 or ED-100
You can use ColorWise Pro Tools in conjunction with the ES-1000 or ED-100 to
calibrate the Fiery.
T
O
CALIBRATE
THE
F
IERY
USING
THE
ES-1000
OR
ED–100
1.
Start Calibrator.
For instructions on starting Calibrator, see
2.
Choose EFI Spectrometer ES-1000 or EFI Densitometer ED-100 as the
measurement method.
3.
In the Check Print Settings pane, choose the desired calibration set.
Choose the appropriate calibration set for the type of media you will use most often.
N
OTE
:
For this calibration to take effect, the calibration set must be associated with one
or more output profiles. There is no need to make any new associations for the default
calibration set, since it is already associated with the default output profile.
Indicator light
Sample aperture
(underneath)
Measure button