Xerox DOCUCOLOR 12, Инструкция к добавке, Страница: 8 / 18

CUSTOMER EPC SUPPLEMENT 4 DOCUCOLOR 12/DCCS 50
2
3
4
5
6
7
Copy Output
The Copy Output feature enables you to select the
destination of the output and determine whether it
is to be collated or uncollated.
Collated refers to copies that are delivered as
sets. Each copy set is in the order in which the
originals were placed in the Duplex Automatic
Document Feeder (DADF). For example, if a set
of originals is placed in the DADF in 1,2,3 order,
the copy set(s) will be in 1,2,3 order.
Uncollated refers to copies that are delivered in
the order in which they were copied. For example,
if a set of originals is placed in the DADF in 1,2,3
order, and you wish to make 3 copies of the set,
the copy sets will output in 1,1,1,2,2,2,3,3,3 order.
1
On the Basic Copying tab, touch one of the
following Copy Output options:
•
Auto Output to direct collated output to the
Top Tray/Output Catch Tray. Your sets will not
be offset.
•
Collated to direct collated output to the Top
Tray/Output Catch Tray.
NOTE: If the In-Line Stapler Finisher option is
installed, output is directed to the Finisher Output
Tray, and your sets will be offset.
•
Touch Uncollated to direct uncollated output
to the Top Tray/Output Catch Tray.
NOTE: If the In-Line Stapler Finisher option is
installed, output is directed to the Finisher Output
Tray, and your sets will be offset.
2
Press the Start button.
3 The copies will be delivered to the appropriate
output tray.
Figure 1: Basic Copying tab