Xerox DocuCentre III C3100 Скачать руководство пользователя страница 84

Страница: 84 / 523

4 Machine Status

Ma
ch
in

e St

Auditron Report (Fax Jobs)

You can check the number of fax transmissions/receptions and the number of pages

transmitted for each user. For Account Administration settings, refer to "Accounting"

(P.195).

Note

•

[No.] displayed on the report is the No. (User Administration Number) registered for the
Authentication and Account Administration feature.

Auditron Report (Scan Jobs)

You can check the total number of pages scanned on the machine. If the maximum limit

is set for the number of pages that can be scanned, you can also view the limit value.

[Auditron Report (Scan Jobs)] counts pages from the time at which the data has been

initialized.

Note

•

[No.] displayed on the report is the No. (User Administration Number) registered for the
Authentication and Account Administration feature.

Automatically Printed Reports/Lists

Some reports/lists relating to the fax and scan services can only be printed

automatically. This section describes reports/lists that can be printed automatically.

Transmission Report - Job Undelivered

Printed when a transmission of transferring the scanned data to the computer on the

network, or sending the scanned data by e-mail has failed. When a fax or the Internet

Fax transmission has failed, this report will also be printed. You can check a reduced

image of the scanned data and its transmission result.
Set whether to print out the Transmission Report - Job Undelivered automatically from

the system administrator mode.

For information on specifying whether or not to have the report printed automatically, refer to
"Transmission Report - Job Undelivered" (P.115).

Scan File Transfer Report

Printed when a transmission of transferring the scanned data to the computer on the

network, or sending the scanned data by e-mail has succeeded. When a fax or the

Internet Fax transmission succeeded, this report will also be printed. You can check a

reduced image of the scanned data and its transmission result.
Set whether to print out the Transmission Report - Job Undelivered automatically from

the system administrator mode.

For information on how to automatically print out the transmission report, refer to "Scan File Transfer
Report" (P.115).

Mailbox Report

You can confirm that a document is stored in a mailbox.

For information on specifying whether or not to have the report printed automatically, refer to "Mailbox
Report" (P.115).

Broadcast Report

You can check the result of a broadcast transmission. The recipients and transmission

result/status are recorded.
If this report is set to be printed automatically, it is printed each time when a broadcast

transmission is complete.

For information on specifying whether or not to have the report printed automatically, refer to
"Broadcast/Multi-Poll Report" (P.115).

Содержание DocuCentre III C3100











































































































































































































































































































































































































































































































































Результаты поиска

Содержание DocuCentre III C3100

Отзывы:

Похожие инструкции для DocuCentre III C3100

Бренды по названию

Популярные бренды

Xerox DocuCentre III C3100, Руководство пользователя

Результаты поиска

Содержание DocuCentre III C3100

Отзывы:

Похожие инструкции для DocuCentre III C3100

Бренды по названию

Популярные бренды