Xerox D110, Руководство по установке

Страница: 11 / 14

2. Enter the IP address of the machine in the address field.
3. Press Enter to go to CentreWare
®
Internet Services.
4. Select the Properties tab.
5. If prompted, enter the system administrator user name and password.
The default user name is admin and the default password is 1111.
6. Select OK.
7. Select the Security folder.
8. Select the Remote Authentication Servers folder.
9. Select Xerox Secure Access Settings in the directory tree.
The Xerox Secure Access Settings page displays.
10. In the Xerox Secure Access Server area perform the following steps:
a) Enter details in the Default Prompt and Default Title fields.
This creates a the prompt and prompt title that displays on the machine UI along
with a message. The message informs users how to authenticate themselves at
the machine.
Note
If the Title and Prompt fields were configured on the Secure Access Server page,
then that information overrides any information entered here.
b) Select the Enabled checkbox for Local Login to allow users to log in at the machine.
c) Select the Enabled checkbox for Get Accounting Code to obtain user accounting
data from a networked accounting server (if used).
d) Select Apply.
Disabling the USB card reader
Use the following instruction for disabling the USB card reader for any of the following
circumstances:
• The USB card reader is being replaced with the traditional flat-box card reading
device.
• Xerox Secure Access is no longer used for authentication on the device.
Note
The USB card reader and traditional flat-box card reader should not be used
simultaneously.
Deactivating the two Equitrac Provider plug-ins
1. Open an internet web browser.
2. Enter the IP address of the machine in the address field.
3. Press Enter to go to CentreWare
®
Internet Services.
7
Xerox
®
D95/D110/D125 Printer and Copier/Printer
Xerox® Secure Access Installation Guide
Xerox Secure Access Installation Guide