Xerox D110 Скачать руководство пользователя страница 249

Страница: 249 / 310

If fault persists, repeat the previous steps; if fault persists after that, call for service.

013-106

Cause: Jam/fault with the SquareFold Trimmer Module

Remedy: Perform the following:

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

Carefully remove all sheets and paper scraps from jam clearance areas.

Close the SquareFold Trimmer Module Top Left and Right Covers.

Check the Trimmer Waste Container:

• If full, empty the container and reinsert it in the SquareFold Trimmer Module.

• If the container is partially pulled out, push it completely in.

If necessary, follow any remaining instructions on the machine’s UI.

If fault persists, repeat the previous steps; if fault persists after that, call for service.

013-208

Cause: The Trimmer Waste Container is full or has a fault

Remedy: Perform the following:

Pull open the container and empty any trimmer scraps from it.

Reinsert the container into the SquareFold Trimmer Module.

Ensure that the container is fully pushed in, and that the indicator light is not lit.

If fault persists, repeat the previous steps.

If fault persists, power off/on the machine.

If fault persists, call for service.

013-221

Cause: Jam or communication error with the SquareFold Trimmer Module

Remedy: Perform the following:

Power off/on the machine.

If fault persists, call for service.

013-222

Cause: Jam or communication error with the SquareFold Trimmer Module

Remedy: Perform the following:

Power off/on the machine.

If fault persists, call for service.

013-223

Cause: Jam or communication error with the SquareFold Trimmer Module

Remedy: Perform the following:

Power off/on the machine.

17-19

Xerox

D110/D125/D136 Printer

User Guide

SquareFold Trimmer Module

Содержание D110























































































































































































































































































































Результаты поиска

Содержание D110

Отзывы:

Xerox D110, Руководство пользователя, Страница: 249 / 310

Результаты поиска

Содержание D110

Отзывы: