dc09cc0453
Customer Support
Page 21
Feature
Implementation
Values
Punch
(w/ C-
Finisher)
<</Punch
int1
/PunchDetails << /Type 5
/Position
int2
/Numholes
int3
>>
>>
setpagedevice
Where
int1
is one of the following:
0 = Do not punch*
3 = Do punch by set unit.
Where
int2
is one of the following:
0 = topside
1 = bottom side
2 = left side
3 = right side
Where
int3
is one of the following:
2 = 2 holes*
3 = 3 holes
4 = 4 holes
Booklet
(w/ C-Finisher
and booklet
module)
<</Booklet
value1
/BookletDetails << /Type 3
/StapleType
int
/PrintInside
value2
/PageSet
value3
>>
>>
setpagedevice
Where
value1
is one of the following:
true = Do Booklet
false = Do not Booklet*
Where
int
is one of the following:
0 = Do not file on inside*
1 = File on inside
Where
value2
is one of the following:
true = Print on inside*
false = Print on outside
This feature is effective only in conjunction
when StapleType is 0.
Where
value3
is one of the following:
true = Integrate several page and folds
false = Fold every page
This feature is effective only in conjunction
with when StapleType is 0.
Interleaving
Paper
(Transparency
Separator)
<</SlipSheet
int1
/SlipSheetDetails << /Type 1
/AutoTraySelect
int2
/SheetTray
int3
/MediaClass (
string
) >>
>>
setpagedevice
Where
int1
is one of the following:
0 = Do not deliver interleaving paper*
4 = Deliver interleaving paper at the end
of each page
Where
int2
is one of the following:
0 = SheetTray is referred and feed
interleaving paper from the
SheetTray
1 = Feed interleaving paper from a tray
following system setting. SheetTray is
not referred*
Where
int3
is one of the following:
0 = Feed interleaving paper from Tray1*
1 = Tray2
2 = Tray3
3 = Tray4
100 = Tray5 (
Bypass)
Where
string
is same as the “Media Class”
feature. It means media class for the
interleaving paper.
