Xerox Copycentre C118, Руководство системного администратора

Страница: 101 / 134

Using CentreWare Internet Services to Configure Settings on the Machine
Xerox CopyCentre/WorkCentre 118 System Administration Guide 101
NOTE: The default user ID is "admin" and the default password is "x-admin".
SNMP
This page allows you to configure the SNMP settings for the following options.
NOTE: Some settings on this page will only be available after you reboot the machine
from CentreWare Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [SNMP].
4.
Set up the following options to be displayed in the frame.
• Community Name (Read Only)
• Community Name (Read/Write)
• Community Name (Trap Notification)
• Key Operator
NOTE: For more information about the options, refer to Properties in the CentreWare
Internet Services chapter of the User Guide.
5.
Select [Apply New Settings] to reflect the new setting.
6.
Enter the user ID and password, then select [OK].
NOTE: The default user ID is "admin" and the default password is "x-admin".
IPP
This page allows you to configure the IPP settings for the following options.
NOTE: Some settings on this page will only be available after you reboot the machine
from CentreWare Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [IPP].
4.
Set up the following options to be displayed in the frame.
• Port Number
• Add Port No.
• TBCP Filter (Only available when the oprional PostScript Kit is installed.)
• Administrator Mode