Network Setup Using a Static IP Address
Xerox WorkCentre M118/M118i
4
Set the IP Address
1.
Press the
Select
button until you see
IP Address
on the display,
and then press the
Enter
button.
2.
If there is an incorrect IP address in the field, press the
Clear
button to delete the address.
3.
Use the numeric key pad to enter the first number of the IP address, and then press the
Right Arrow
button
to move to the next field.
4.
Repeat Step 3 to enter the remaining numbers.
Note
If you are using a server name for the machine (instead of an IP address), you must enter the DNS
server information. Use CentreWare IS to set the DNS server address. See
Verifying Network Setup
Using CentreWare Internet Services (IS)
on page 5.
5.
Press the
Enter
button to accept the address.
6.
Press the
Exit
button.
Set the Gateway Address
1.
Press the
Select
button until you see
Gateway Address
on the display,
and then press the
Enter
button.
2.
Use the numeric key pad to enter the first number of the gateway address, and then press the
Right Arrow
button to move to the next field.
3.
Repeat Step 2 to enter the remaining numbers.
4.
Press the
Enter
button to accept the address.
5.
Press the
Exit
button.
Set the Subnet Mask
1.
Press the
Select
button until you see
Subnet Mask
on the display,
and then press the
Enter
button.
2.
Use the numeric key pad to enter the first number of the subnet mask, and then press the
Right Arrow
button to move to the next field.
3.
Repeat Step 2 to enter the remaining numbers.
4.
Press the
Enter
button to accept the subnet mask.
5.
Press the
Exit
button.
6.
Press the
Log In/Out
button to return to the main menu.