Xerox ColorQube 8700, Справочное руководство

Страница: 16 / 28

CQ8700-8900
Customer Support Page 16
Hole Punch
This command indicates hole punches for a print job on a device with hole punch capability.
Note: Some hole punch options may not be available on every product model.
PJL COMMENT Command DSC Comment Command PS
@PJL COMMENT
OID_ATT_PUNCH
int ;
%%OID_ATT_PUNCH int ; << /Punch int1 /PunchDetails << /Type 6
/NumHoles int2 >> >> setpagedevice
Where int is:
0 = Punch Off
1 = Punch On
2 = Use 2 Hole Punch
3 = Use 3 Hole Punch
4 = Use 4 Hole Punch
Note: int 1 will be emitted to invoke the default punch
setting on the device.
Where int1 is:
0 = Punch Off
4 = Punch On (after each showpage or copy
page operation)
Where int2 is:
0 = Punch Off
1 = Punch On
2 = 2 Hole Punch
3 = 3 Hole Punch
4 = 4 Hole Punch
Note: Setting NumHoles to 1 causes a punch
with the default number of holes.
Fold
This command indicates an optional fold type generated by the professional finisher. The short edge feed command is
also required to use the booklet fold command.
Note: Some fold options may not be available on every product model.
PJL COMMENT Command DSC Comment Command PS
@PJL COMMENT
OID_ATT_FOLD
string ;
%%OID_ATT_FOLD
OID_VAL_FOLD_
string ;
<< /Fold int1 /FoldDetails << /Type 5
/FoldMethod int2 >> >> setpagedevice
Where string is:
TRIFOLDC
TRIFOLDZ
ZFOLD
Where int1 is:
0 = No Fold
3 = Fold at end of set
Where int2 is:
1 = TriFold C
2 = TriFold Z
3 = Z-Fold HalfSheet
Note:
•
TriFold C requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command to
insure SEF feeding.
•
TriFold Z requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command.